Quality Replacement Filters For Less
WELCOME TO THE FILTER STORE INVENTORY SPECIALS PAGE!
We will be updating this page on a regular basis, with our excess filter inventory at greatly reduced prices.
We have 10 excess CC-10 Filters for sale.
These are new, OEM, Pentair Filters. (Formerly known as Pentek, Ametek, etc...) These granular activated carbon cartridges are an excellent chouice to reduce unwanted chlorine taste & odor, and certain VOCs from potable drinking water. They also reduce MTBE. They contain a coconut shell-based activated carbon, which produces drinking water of exception taste and quality and provides better VOC reduction than standard GAC cartridges. They fit most standard 10" filter housings, except slim-line style.
Our special price on these is $8.50 each, while supplies last.
We have some excess Hydraulic Filters for sale.
We have 2 pieces of an Separation Technologies part number H660R03N. This crosses to the following manufacturer's filters:
Fleetguard P/N: HF28660
We have seen these selling for in excess of $161.00 each on line. Our special price is $60 each!
We have 4 pieces of MP Filtri part number SF520M90, suction filter. This crosses to the following manufacturer's filter:
Filter-Mart P/N: 32-0932
We have seen these in excess of $51 each online. Our special price is $15 each!
We have 4 Pleatco Pool & Spa filters for sale.
NEW LOWER PRICE BELOW!
We are running a special on some overstock Pleatco Pool and Spa filters that we have. They are all new condition, still wrapped in plastic.
We have 4 pieces of a Pleatco P/N: PWW50P3 w/Pad 3L. This filter is for a Waterway Front Access Skim Filter. The manufacturer's P/N: is 817-0050. This filter also crosses to a Unicel P/N: 6CH-940 and a Filbur P/N: FC-0359. The dimensions are 6"OD x 7.63"Tall x Handle Top x 1 1/2"SAE Bottom. Your new cost is $10.00 each or all 4 for $35.00.
Note: The PJW50 filters shown in the picture have been sold. Only the PWW50P3 w/Pad 3L filters are still available.
If you have a question on whether this will fit your unit or not, please contact us and we will verify with the factory. (Note: These filters are still available, and we can get more, but they won't be at the sale price.)
We have 3 Master Pneumatic 3/4"FRL units for sale.
Two of the three units come with a 0-200PSI gauge. One does not. These are older Vanguard model Filter/Regulator/Lubricators which include an FD100 Filter, an R100 Regulator and an L28D Lubricator for the ones with a gauge and and L28 with the unit without a gauge. The Filter and Lubricator have Polycarbonate plastic bowls with a Steel shatterguard. The units are approximately 13" long x 7 1/2" tall.
We have excess stock of Fleetguard P/N: 3S66CGEB08 / Separation Technologies P/N: ST2970 Spin On filters.
These filters are in new condition, still in their shrink-wrap. This filter crosses to Pall HC7400SKN8H, PTI F4F040HCB, Donaldson P169392, Baldwin BT8509-MPG and Filter-Mart F7400-8K6B, among many others.
We also have excess stock of Fleetguard P/N: HF0730800 / Separation Technologies P/N: ST-7308 pleated paper filter elements.
These filters are in new condition, still in their shrink-wrap, and come in their own individual boxes as well. This filter crosses to a Schroeder C10 and a Filter-Mart 01-0098, among others.
The cartride filter's dimensions are approximately 2 7/8"OD top and bottom x 1.03"ID top (closed bottom) x 4.75"Tall. There is an O-ring seal in the open end and the filters are rated 10 micron Nominal.
We have 10 pieces for sale, currently. Your cost is $4.00 each, or if you buy all 10 at once, $3.00 each. These are listed elsewhere online for $10 each and up.
We have a stock of Cylindrical, 316SS, 5 micron, 10" filter elements. We have 10 pieces in stock currently.
These filters are Double Open End and are cleanable and reuseable. The filters are in stock currently with no gaskets for the ends, but you can choose from a few different material which we will provide with the filters. We have Buna, Viton, and Teflon available, with other materials on request. Depending on the material chosen, these filters are good to
We have a special deal on some excess stock of all Polypropylene, Pleated Liquid Filters in 2 efficiencies.
These filters are all new, individualy bagged and sealed. The nominally rated filters have an outter netting and polypropylene end caps. The absolute rated filters have an outter cage and polypropylene end caps with EPDM gaskets.
NEW LOWER PRICES BELOW!
Nominally rated filters.
Absolute rated filters
NEW LOWER PRICES BELOW!
We also have some excess stock of string wound style filters.
We have 45 pieces of our SU10R30T filters. These are a 30" long, 10 micron, unbleached cotton string wound filters with tin-steel cores. These are excellent for higher temperature applications. Each filter is individually bagged and they come in cases of 15 each. Your special cost for each is $0.75.
We also have 15 pieces of SC100R297P. These are 29 3/4" long, 100 micron, bleached cotton string wound filters with polypropylene cores. Each filter is individually bagged. Your special cost on these is $0.65 each.
*For a limited time only, while supplies last.
Excess Stock of Pentek UB-1 Filter
Housing Mounting Kits.
We have 12 pieces of Pentek (formerly Ametek, Pentair Filtration, etc.) #10 housing mounting bracket P/N: UB-1 (151011). While supplies last, we will be selling these at the special cost of $0.50 each!
Disclaimer: The Filter Store, Inc. is an aftermarket supplier only. We are not in any way affiliated with the OEM Manufacturers listed. Manufacturer's names are for reference only. We supply Filter Store Brand filters only.